Kitchener Forklift Training Programs

Kitchener Forklift Training Programs - Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of forklifts, pre-shift check, fuel kinds and dealing with fuels, and safe utilization of a forklift. Practical, hands-on training assists participants in obtaining essential operational skills. Program content covers current rules governing the utilization of lift trucks. Our proven forklift programs are meant to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

How to Safely Handle Loads

Do not raise or lower the fork whilst the lift truck is traveling. A load must not extend higher than the backrest because of the risk of the load sliding back toward the operator. Inspect for overhead obstructions and ensure there is sufficient clearance before raising a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it slightly back.

The lift truck is less stable when a load is in a raised position. Ensure that no one ever walks under the elevated fork. The operator must never leave the forklift while the load is raised.

While handling pallets, forks must be high and level enough to go into the pallet and extend all the way below the load. The fork's width should provide even weight distribution.

Before loading or unloading the truck, set the brakes and chock the wheels. Floors should be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed in order to support a semi-trailer that is not attached to a tractor. The entrance door height must clear the forklift height by a minimum of 5 cm. Mark edges of ramps, docks or rail cars and avoid them.

Do not stay in a lift truck for a long time without correct ventilation. The interior of the truck must be properly lighted and free of trash, loose objects and obstructions. Inspect for holes in the floor. The installation of material that are non-slip on the floor would help avoid slipping. Clear whichever obstructions from dockplates and docks and make sure surfaces are not wet or oily.

Lift trucks must not be utilized to push or tow other forklifts.

Click to Download the pdf